High Corrosion Protected Products
Channel Connector SK-L HCP


Aplicação
Element for connecting Channels. The multiple bearing of the Channel is to be secured. The Channel Connector should not to be used between the last two bearing points. In combination with Channels > 41/21 the admissible limit has to be respected.
Instalação
Position the Channel Connector on the back of the channel and bolt together the channel ends (through the channel slots) by means of each two Self Forming Screws FLS F 80.
Dados Técnicos
Max. adm. limit/ flexion: | 300 Nm |
Material: | Steel S235 JR, HCP |