Assembly Set MS 5P
Element for connecting Beam Bracket TKO, Angled Beam Bracket SKO, End Support WBD or Pivot Joint GE F to a beam section.
| Type|| Beam Clip|
| Support plate|
| HR trimming *|
|M12 S||4 x M12||4 x M12|| 4 x M12 x 80|
|M16 S||4 x M16||4 x M16|| 4 x M16 x 100 |
|M12 S2||2 x M12||2 x M12||2 x M12 x 80|
* HR trimming according EN 14399-3 consisting of: Hexagon bolt M12 or M16, 2 washers, 1 hexagon nut
| 1.|| Position Beam Clip with the split end on beam section.|
| 2.|| Install support plate and HR trimming and tighten accordingly.|
The support plate secures a rectangular assembly of the bolt and prevents its shifting or bending stress. In conjunction with the HR trimming a continuous and predictable preload force is guaranteed.
| Type|| Size range|
| Tightening torque MA|
| Fy permitted|
per Beam Clip
| Shear force load capacity Fz|
per set = 4 Beam Clips
|M12 S||1 - 30||85||26,3|| 12,0 *|
|M16 S||4 - 40||150||32,0||13,6 *|
* The specified data relate to the worst case with flange thicknesses 30 mnm (M12) or 40 mm (M16) as well as a coefficient of adhesion µadhesion = 0,20.
A possibly operating tensile force Fy isn't included.
| Material:||Steel, HCP|