Channel Holder MOF 27
To be used for installing crossbars between two Channels MS 27 or as base unit for projecting channels.
Note: When assembling version MH as cantilever, consider sufficient bracing of the channel. In case of tension load Fz at channel slot, screws must be displaced.
Position the channel into the U-profile. Click in the Speed Nut by pushing on the bolt head and tighten with 10 Nm.
| Adm. anchor loads to be respected|
Max. adm. load for assembly on ceilings
in vertical direction: 0,8 kN
| Material:||Steel, electro-galvanised|