Ducting Clamp PLU TOP 2G with lining
Two-piece pipe clamp for simple installation of spiral-seam ducts. Suitable for soundproof installation according to DIN 4109.
With glued-in rubber profile. Clamping bolts are pre-mounted and retained. Pivot screw for safe and simple assembly with quick-set clip, suitable for "single-hand" mounting. Easier handling and better storage possibilities due to optimized packaging
Tighten upper part of the pipe clamp without the interfering lower part.
Hook lower part, provided with a keyhole, into the fixed clamping bolt (see picture). After inserting the pipe and locating into the pivot screw, the clamping bolt head is located behind the angled profiles; then tighten clamping bolt with max. 2 Nm.
| Type|| Material|
| adm. load|
| Thread connection|
|71 - 200||20 x 1.5||0.8|| M8/M10|
|224 - 500||25 x 1.5||1.0||M8/M10|
| Material:|| Steel, galvanised |
| Insulation insert:|| SBR/EPDM black (rubber profile - see chapter "Sound Absorption Products")|
| Temperature range:||-50°C up to +110°C|