Guiding Bracket FW F L/Z
Using this Guiding Bracket it's possible to guide Pipe Shoes with different plate thicknesses. The different versions of Type Z are suitable for the respective specified maximum plate thickness (t)and so additionally allow the absorption of lifting forces.
Delivery as set comprising 2 Guiding Brackets.
Installation on top of Beam Section TP F 80 repectively F 100 with 2 Self Forming Screws FLS F per Guiding Bracket, i.e. per set 4 Self Forming Screws have to be used altogether. You can find the Self Forming Screw in the siFramo chapters (section Siconnect).
For Type Z exists a clearance of 3 mm in the vertical z-axis. Please ensure a clearance of 3 mm in the vertical y-axis for all types.
| Type|| perm. load Fy|
| perm. torque via Fy*|
| perm. load Fz|
|FW F 80, all Types Z||1.9||0.4|| 5.0|
|FW F 80, Typ L||1.9||-|| -|
|FW F 100, all Types Z||1.9||0.4|| 6.4|
|FW F 100, Typ L||1.9||-||-|
* the torque is calculated by M = Fy x h, whereas the perm. load for Fy may not be exceeded. Dimension h refers from the middle of the pipe to the top of the base plate.
The perm. loads have been determined by load tests following DIN EN 13480-3 annex J.
The used Pipe Shoe has to be verified separately.
| Material:||Steel, HCP|