Guided Support FR - H 20 (DN 15 - 50)
Guided Support for attachment of steel or stainless steel pipes of DN 15 up to DN 50 on steel beams with width of 80 up to 300 mm and max. flange thickness of 20 mm.
Preassembled Guided Support including contact corrosion protection by means of a U-bolt sheath and slide bearers. U-bolt with welded-on semi-washers and 2 hex nuts to secure position.
Guided Support set contains:
2 clamping hooks with slide bearers
1 slide bar
1 connecting rod M10
1 U-Bolt fixing plate
4 nuts M10
Position the preassembled clamping hooks onto the beam flange and tighten the nuts (to 10 Nm). For beam width < 100mm both nuts of the PA bearing block in the middle have to be removed. Fasten U-bolt to U-Bolt fixing plate by means of the included nuts (to 15 Nm) The pipe slides directly on the PA bearing blocks. Axial guiding of the pipe is ensured by the U-bolt.
| DN|| D|
| Type|| for flange width|
|80/120|| 80 - 120|
|140/160|| 121 - 160|
|180/220|| 161 - 220|
|240/260|| 221 - 260|
|280/300||261 - 300|
| U-bolt:|| Steel, HCP|
| U-bolt sheath:|| Polyamide 6.0, free of halogens|
| Sheet metal parts:|| Steel, HCP|
| Rod, nuts:|| Steel, HCP|
| PA block:|| Polyamide 6.0, 30 % glass fibre reinforced, black|
| Temperature range:||-20 to +130° C (at the PA blocks and shrinking tube)|
* in stock