End Support STA F 80
Plug-in component designed to create an endplate at the open end of a Beam Section TP F80 or a Cantilever bracket AK F80. By means of the round holes in the base plate a direct connection to excisting cast-in channels is possible.
Depending on the version, following mountings solutions are possible:
|a)|| With 2x4 Self Forming Screws FLS when used to connect 2 Beam Sections.|
|b)||With 4 Self Forming Screws FLS applied to the octagonal insert and 2 suitable wall anchors/fixings when connected to the building structure.|
The Beam Section TP F 80/80 connected to the End Support STA F 80 has to be screwed with 4 Self Forming Screws FLS F. On each of the opposite sides 2 Self Forming Screws FLS F are necessary.
| Type|| Dimensions of Base plate |
|STA F 80||190 x 80 x 8||14||20 x 11|| 148|
|STA F 80-E||165 x 80 x 8||-||20 x 11||148|
| Configuration:|| Base plate welded to octagonal element F 80|
| Plate:|| Steel, HCP|
| Octagonal element:||Steel, HCP|
Aprovações / Conformidade
CE mark (Declaration of performance see www.sikla.com/downloads)