SOLUÇÕES INOVADORAS
DE SUPORTAGEM
siFramo 80

End Support WBD F 80

Aplicação

Plug-in component designed to create a square endplate at the open end of a Beam Section TP F80 or a Beam Bracket/Cantilever bracket AK F80. Variation “T” with octagonal insert allows full utilisation of beam section within the space required by the End Support WBD itself.

Instalação

Depending on the situation, different options are recommended:

a) Directly to building structure: 4 x suitable wall anchors and 4 Self Forming Screws FLS applied to the square/octagonal insert
b) To traditional steel beams between 80 – 300 mm flange dimensions: 1x Assembly Set 5P M12 S, M16 S and 4 Self Forming Screws FLS applied to the square/octagonal insert
c) To traditional steel beams > 120 flange dimension: with on-demand Adaptor Plate (tbc)
c) To Sikla Simotec Steel Beams 100/120: with Bracket Plates FV 100/120 when positive mechanical connection required

The Beam Section TP F 80 connected to the End Support WBD F 80 has to be screwed with 4 Self Forming Screws FLS F. On each of the opposite sides 2 Self Forming Screws FLS F are necessary.

Dados Técnicos

Type
For flange width
[mm]
Dimensions of base plate
[mm]
Slots in base plate for
H
[mm]
WBD F 80-80/120 80 - 120 220 x 220 x 12 M12 192
WBD F 80-121/160 121 - 160 320 x 260 x 12 M12 192
WBD F 80-161/200 161 - 200 320 x 310 x 12 M16 192
WBD F 80-201/300 201 - 300 420 x 220 x 12 M16 192
WBD F 80-T 80 - 120 220 x 220 x 12 M12 152

Configuration:
Base plate welded to square F 80 resp. octagonal element F 80 (nur WBD F 80-T)
Material:
Plate:
Steel, HCP
Square F 80:
Steel, HCP
Octagonal element F 80:
Steel, HCP

Zulassungen / Konformität

CE mark (Declaration of performance see www.sikla.com/service/downloads)
MPA tested

End Support WBD F DoP A421-A821 PDF | 37.1 KB

TypG
[kg]
Verp.
[Stück]
Artikel-
Nr.
WBD F 80-80/1205,21 192801
WBD F 80-121/1608,71 192818
WBD F 80-161/20010,21 192825
WBD F 80-201/3009,41 192832
WBD F 80-T4,81 192849