Chilled Water Clamp AKS
Suitable for secure prevention of condensation at the pipe support location of chilled-water and cold-water pipelines as well as insulation clamp for heating systems.
Suitable for soundproof installation according to DIN 4109.
Consisting of pipe clamp and insulation insert.
Enclose the insulation insert around the pipe, remove the protective paper strip on both sides of the insert and merge the longitudinal seam. Fix the pipe clamp in the centre of the plastic spacers. Lag the pipe insulation to each end of the insulation insert.
For horizontal installations to a wall-face, the plastic spacers on the insulation insert have to coincide with the pipe clamp flanges positioned over and under the pipe. Support distances see Installation Guidelines, chapter "Pipe support".
| Pipe clamp:|| Steel, electro-galvanised|
| Insulation:|| Elastomer foam|
| Length b:|| 80 mm|
| Thermal conductivity:|| λ ≤ 0,038 W/(mK) at 0°C|
| Steam diffusion resistance factor:|| µ ≥ 7.000|
| Material class:|| BL -s3, d0 (in overall system of identical Elastomer foam)|
| Temperature range:|| 0°C up to +110°C|
| Storage conditions:||In dry, clean rooms with humidity 50 - 70% and room temperature 0 - 35°C|