U Clamp RUC I
Guided Support for the installation of siFramo Beam Sections, Channels 41 and steel girders (H-, I- and Double-U) to support overlying pipelines. This U Clamp can be used as an alternative for Non-Grip (Guide) U Bolt applications. The sliding plate reduces friction between pipe and substructure. The plastic layer and the sliding plate ensure a galvanic isolation between pipe and U Clamp as well as substructure, so it's possible to fasten e.g. stainless steel pipes.
U Clamp RUC I with pre-assembled plastic layer. Sliding plate enclosed.
Depending on the existing substructure the following options are possible:
| a)|| On top of siFramo Beam Sections with Self Forming Screws FLS|
| b)|| On top of Channels 41 with bolts M10 and suitable Channel Nut|
| c)||On top of steel girders (H-, I- and Double-U) with bolts M10|
| Type|| perm. load Fy|
| perm. load Fz|
|27 - 121||0.6|| 2.3|
|152 - 336||0.2||0.8|
The perm. loads have been determined by load tests following DIN EN 13480-3 annex J.
For the installation on top of steel girders and Channels 41 the load capacities of these substructures (and connection parts) have to be verified.
| Clamp body:|| Steel, HCP|
| Layer and sliding plate:|| Thermoplastic resins |
| Temperature range:||-20°C to +90°C (at layer and sliding plate)|